1. Check whether the tap water pressure of the user's home is lower than before. If so, you need to find the water company to check the water supply pipeline and pressure.
2. Check the condition of the pipeline valve connecting the shower and the water heater. If the valve is opened slightly, the water inlet valve needs to be opened larger.
3. If you live on a high floor and the water pressure is low, you need to connect a booster pump in series between the water supply valve of the water heater and the water inlet so that there is enough pressure.
Otherwise, after the tap water reaches the upper level, the pressure will be lowered by the mixing valve, etc., and the water output will become smaller
4. The diameter of the water mixing valve is small, and throttling will also result in a smaller water output. We can try to connect the hose to the water supply valve of the water heater, or directly connect the nozzle hose to the hot water outlet of the water heater, and judge whether the water mixing valve is good or bad according to the water output of the nozzle. If the mixing valve is broken, just replace the mixing valve
5. Improper installation will result in a small amount of water output from the shower, such as deformation of the rubber ring, uneven or too thin outlet pipe joints, and hoses not facing the shower, etc. We should choose the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall the hose.
6. The nozzle is inherently deficient, and the large internal resistance leads to a small water output. At this point, only the nozzle needs to be replaced.
7. The shower sprinkler hose is blocked and cannot discharge water. At this time, a new hose needs to be replaced. During normal use, pay attention to protecting the hose, otherwise it is easy to leak or block.
8. The nozzle is blocked, resulting in poor water flow. If the tap water at home is too alkaline and contains some impurities, it is easy to block the small holes of the shower. In addition, air, sediment, dust, etc. will also enter the interior through the small holes of the shower, and the long-term accumulation will also block the shower. Improper adjustment of the shower head may also lead to increased scale of foreign matter. At this time, the shower head should be cleaned in time, or the shower head should be replaced directly.
